Replacing The Cleaning Wiper - MUTOH ValueJet VJ-1638UH Operation Manual

6 Maintenance
6.4.4

Replacing the cleaning wiper

This section explains how to replace the cleaning wiper.
NOTE
Make sure to install the cleaning wiper in the printer.
The cleaning wiper is an essential part to make printing consistent.
(1) Replacement time
Every six months
(2) Type
TIP
For types and details of the cleaning wiper, contact your local MUTOH dealer.
(3) Replacing steps
Follow the steps below to replace the cleaning wiper.
CAUTION
• For this operation, be sure to wear the supplied gloves (or solvent resistant gloves)
and goggles to prevent ink from contacting your eyes or skin.
• Skin or eye contact with UV curable ink may cause skin inflammation or allergic
reaction.
• If ink gets on skin, immediately wash with soap and plenty of water for 15 minutes.
Seek medical advice/attention if irritation or inflammation are present.
• If ink gets in eyes, flush eyes with plenty of water for 15 minutes and seek medical
advice/attention immediately.
1. Check the followings while the printer is turned ON.
• Printing or other operations are not in progress.
• Operation panel display is Normal.
306
VJ-1638UH OPERATION MANUAL
6.4 Replacing consumable components