Cylinder Removal; Piston Removal - Honda 1988 Z50R Service Manual

CYLINDER / PISTON
CYLINDER REMOVAL
Remove the following:
- cylinder head (section 6)
- cylinder mounting bolt .
- cam chain guide roiler bolt, washer and guide roller.
- cylinder
NOTE
Keep the cam chain from falling into the crankcase when remov -
ing the cVlinder.
Remove the dowel pins. O-ring and gasket .
PISTON REMOVAL
Stuff a shop towel into the crankcase.
Remove the piston pin clips with needle nose ptiers .
NOTE
Do not let the clips fall into the crankcase.
Press the piston pin out of the piston and remove the piston.
Remove the piston rings, being careful not damage them.
NOTE
Spread each piston ring and remove it by lifting up at a point op-
posite the gap.
7-2