Honda 1988 Z50R Service Manual page 98

TRANSMISSION / CRANKSHAFT / KICKSTARTER
'88- '89. ' 91 -' 92:
Remove the snapring and disassemble the kickstarter.
Check the pinion gear, kickstarter spindle, friction spring and
return spring for wear or damage.
After '92 :
Remove the snap ring and disassemble the kickstarter.
Check the pinion gear, kickstarter spindle, starter drive
ratchet , friction spring, and return spring f o r wear or damage .
Assemble the kickstarter spindle in the reverse order of disas-
sembly
Install the kickstarter spindle by inserting the end of the friction
spring in the crankcase cutout .
10-6
RETURN SPRING
SNAP RING
RETURN SPI R ING
'S8- '89 , '91-'92:
SPINDLE
FRICTION
I
SPINDLE
After '92 :
PINION
GEAR
RING