Camshaft/Rocker Arm Removal - Honda 1988 Z50R Service Manual

CAMSHAFT/ROCKER ARM REMOVAL
'88-'91
Remove the spark plug cap.
Loosen the 6 mm bott and tap the bott head to loosen the cylinder
head left side cover.
Remove the 6 rnm bolt.
After ' 91
Camshaft Removal
Remove the spark plug cap.
Loosen the 6 mm bolt and tap
it
to loosen the cylinder head
left side cover.
Remove the cylinder head left side cover and gasket .
'S8 -'91
Remove the left side cover.
Remove the sealing bolt, washer, cam chain tensioner spring and
push rod (page 9-31 ,
Remove the left cranKcase cover (page 9-21.
Tum the crankshaft counterclockwise until the " 0 " mark on
the cam sprocket aligns with the index mark on the cylinder head.
Remove the cam sprocket bolts. set plate and cam sprocket.
NOTE
Suspend the cam chain with a piece of wire to prevent the
chain falling int o the cylinder.
CYLIND ER HEAD/VALVES
~(
L EFT SIDE COVER
L
INDEX MARK
6-3