Gearshift Linkage Removal - Honda 1988 Z50R Service Manual

CLUTCH / GEARSHIFT LINKAGE
Bend the tab of lock washer A up into the lock nut groove.
Install the gasket and clutch outer cover.
Install the bearing .
Install the clutch cam, retainer spring and oil pass pipe .
Install the clutch lever on the gearshift spindle.
Install the ball retainer as shown.
Install the R. crankcase cover (page 8-12).
GEARSHIFT LINKAGE
REMOVA L
Remove the following:
- Right crankcase cover (page B-2)
- clutch (page 8-3)
- snapring and primary driven gear.
8-10