Cylinder Head Installation - Honda 1988 Z50R Service Manual

CYLINDER HEAD/VALVES
Tap the valve stems gently with a plastic hammer to firmly seat
the cotters.
CAUTION
Suppar( the cylinder head above Ihe work bench sur/ace
/0
prevenT
possible valve damage.
CYLINDER HEAD INSTALLATION
Clean off and gasket material from the cylinder surface.
Install the O-ring, dowel pins, collar and a new gasket.
Check that the orifice is not clogged.
Install the rocker arms and rocker arm shafts into the cylinder
head.
NOTE
Install the shafts with the threaded end facing the right side.
6-14
ROCKER ARM SHAFTS
~~
"
('