Front Brake Inspection - Honda 1988 Z50R Service Manual

FRONT WHEEL/ BRAKE/ SUSPENSION / STEERING
InSlall the dust seal and side collar .
InSlall the brake panel.
Position the wheel inside the fork legs.
NOTE
POSItion the groove on the brake panel to align with the boss on
the fork leg .
Insert the axle shaft from right side.
Tighten the axle nut.
TORQUE : 50N'm (5.0 kg -m . 36 ft·lb)
Connect the brake cable to the brake arm.
Install the brake adjusting nul and adjust the front brake (page
3 - 101.
FRONT BRAKE
INSPECTION
Remove the front wheel, then remove the front brake panel from
the wheel hub.
Measure the brake shoe lining thickness.
SERVICE LIMIT: 2.0
mm
(0.08 In )
I
BRAKE PANEL
•
11-7