Rear Brake Inspection; Rear Brake Disassembly - Honda 1988 Z50R Service Manual

REAR WHEEL/ BRAKE / SUSPENSION
Install the left side collar in the hub then insert the axle from the
right side through the right chain adjuster, wheel assembly, left
side collar. and left chain adjuster.
Loosely install the axle nut .
Push the wheel forward and install the drive chain on the sprocket.
Adjust the chain adjusters (page 3 - 8).
Tighten the axle nut .
TORQUE : 50N"m (5.0 kg -m , 37 ft -Ib)
Connect the brake rod to the brake arm With the nut, then check
the pedal free play.
REAR BRAKE
INSPECTION
Remove the rear wheel (page 1 2-3). then remove the brake panel
from the wheel hub.
Measure the brake shoe lining thickness.
SERVICE LIMIT: 2.0
mm
(0 .08 inl
Measure the rear brake drum J.D .
SERVICE LIMIT: 80 .5
mrn
(3 .17
in)
DISASSEMBLY
Remove the brake shoe spring from the brake panel using a
screw~
driver .
12-6
•