Assigning A Class Of Service (Cos) - Siemens HiPath 1100 Programming Manual

Important settings
Step by step
dkf
q
eee
32
w
Enter the programming code.
w
r
To activate/deactivate the permission:
or
q
= Activated
r
= Deactivated (default)
w
Initial status for programming mode.

Assigning a class of service (COS)

Required: Programming mode must be activated (*95
31994).
w
Enter the programming code.
w
p
Enter the number for the group of external lines (e.g., 0,
890...899).
w
p
Enter a class of service for day mode and another for
night mode:
• 1st digit defines the input for day service class
• 2nd digit defines the input for night service class
Classes of service:
d
= Restricted
e
= Outward-restricted trunk access with Denied
f
= Outward-restricted trunk access with Denied
g
= Outward-restricted trunk access with Denied
h
= Outward-restricted trunk access with permis-
i
= Outward-restricted trunk access with permis-
j
= Outward-restricted trunk access with permis-
k
= Unrestricted Trunk Access (default for all lines)
List 1
(10 slots)
List 2
(25 slots)
List 3
(35 slots)
sion list 1
(10 slots)
sion list 2
(25 slots)
sion list 3
(25 slots)