Interdigit Pause Time Setting - Siemens HiPath 1100 Programming Manual

Step by step
ejm
de
...
ffk
e . i
Required: Programming mode must be activated (*95
31994).
w
Enter the programming code.
w
mm
Enter the length of time (01 to 99 seconds) for external
monitoring. The default setting is 10 seconds.
w
Initial status for programming mode.

Interdigit pause time setting

This allows you to configure a pause ("P") between MF
digits. This can be used when programming system and
individual speed dialing, system telephone programma-
ble keys or for enabling Suffix dialing.
This period of time can be set from 1 to 5 seconds. The
default setting is 2 seconds.
Required: Programming mode must be activated (*95
31994).
w
Enter the programming code.
w
Enter the length of time for the Pause (from 1 to 5 sec-
onds)/
w
Initial status for programming mode.
General settings
101