Extension Coefficient - Siemens HiPath 1100 Programming Manual

Step by step
p
ehj
ehl
e . h
de
de
w
Enter the extension number (e.g. 12/102) to which you
want to assign the CD port.
w
p
Enter the next number for the CD port and extension.
or
w
r
Press this key.
Initial status for programming mode.
Deleting a CD Assignment from an Extension
Required: Programming mode must be activated (*95
31994).
w
Enter the programming code.
w
p
Enter a number from 01 to 24 for the CD port.
w
p
Enter the extension number (e.g. 12/102) to be pro-
grammed.
w
q
Delete the CD assignment from the extension.
w
p
Enter the next number for the CD port and extension.
or
w
Rr
Press this key.
Initial status for programming mode.

Extension coefficient

If the impedance value or appropriate type of internal
line is available, the quality of transmission and recep-
tion can be improved.
Required: Programming mode must be activated (*95
31994).
w
Enter the programming code.
w
p
Enter the analog extension number (e.g., 12/102).
w
Enter the appropriate number for the type of line.
For example, in the case of Brazil it would be:
dl
a = for the HiPath 1150
fh
a = for the HiPath 1190
By default, the assignment starts at the first ex-
tension slot on // systems HiPath 1120/1150.
Programming an extension
81