Hipath 1100 Manager - Siemens HiPath 1100 Programming Manual

HiPath 1100 Manager

Step by step
186
Architecture: TAC's operation is based on a Client/
Server architecture. The server is connected to the C.O.
via an ADSL module or a serial interface. It can then ex-
change signals with the C.O. and receive all information
about an extension, including its status. Whenever any
activity occurs, the server sends a command to the ex-
tension's client-PC via LAN. When the server receives a
command from the client-PC, it sends it to the ex-
change.
HiPath 1100 Manager
The HiPath 1100 Manager is an administration software
designed for programming HiPath 1100 systems quickly
and easily by means of a graphical interface without the
need to know programming codes.
Considerations:
The HiPath 1100 Version 7 .0 application installa-
tion overwrites the installation of previous ver-
sions of applications. During the installation pro-
cess, no messages are displayed to warn the
user that previous versions of HiPath 1100 appli-
cations are being removed.
A HiPath 1100 Version 5.2 and 6.0 PABX can be
managed using HiPath 1100 Version 7 .0, as these
versions are compatible.
HiPath 1100 Versions 5.2 or 6.0 and HiPath 1100
version 7 .0 cannot be installed on the same com-
puter, otherwise, neither will work.
The HiPath 1100 Manager can access the switch as fol-
lows:
Locally: Connecting a USB interface, an optiPoint
•
500 U interface, a V.24 interface
P0/E
• Remotely: using a LAN, when a computer of the
network is connected to the HiPath 1100 via serial
interface, USB interface or ADSL module.
When using remote administration over an ISDN
digital line, where no traffic is detected between
the system and the remote programmer, the sys-
tem can be configured to terminate the connec-
tion after a specified period of time (1 to 60 min-
utes) or to maintain the connection indefinitely.
The default timeout setting is 30 minutes.