Date/Time - Manual Setting - Siemens HiPath 1100 Programming Manual

Step by step
eke
Wait 5 seconds
eeh
Digits configured with this feature cannot be dialed
when using a caller list.
For example,
The following number is stored in the caller list:
0893415000 and the digits specified for suppression
are 089 (area code).
When an external call is made from a caller list, the sys-
tem dials only the number 3415000. The code 089 will
not be dialed.
In the default configuration no digits are excluded.
Required: Programming mode must be activated (*95
31994).
w
Enter the programming code.
p
Enter the first digits (up to 6) that are not supposed to
be dialed when using a Caller List.
w
Wait for a confirmation tone.
Initial status for programming mode.

Date/time - manual setting

The date and time can be shown on your system tele-
phone display. It is important to set the correct time/
date for recording call details.
Required: Programming mode must be activated (*95
31994).
w
Enter the programming code.
p
Enter the date and time:
de.ge
de.ef
dd.mm
dd.fg
dd.im
For example, 0508990830 for 05/08/99, 08:30 a.m.
w
Initial status for programming mode.
=Day, from 1 to 31
=Month, from 1 to 12
=YY - Year, from 00 to 99
= Hour, from 00 to 23
=Minute, from 00 to 59
General settings
103