Automatic Msn Assignment Via Local Carrier; Assignment Of An Msn To Attendants - Siemens HiPath 1100 Programming Manual

Step by step
emf
Automatic MSN assignment via local
carrier
This is a subscription service activated by a local carrier.
When this facility is activated external line MSNs can be
automatically registered.
When you press the Scan button on the HiPath 1100
Manager (Basic -> MSN -> Settings -> Browse Button -
for further information, see the Help file), a message is
sent to the local carrier requesting the MSNs. Once the
carrier receives the message, it replies by sending the
MSNs, which are then automatically entered into the
system.
In order for all MSN numbers to be entered, the remote
seizure mode must be configured as PMP (Point-to-
Multipoint) and the system number must not have been
specified in the HiPath 1100 Manager (Advanced->Sys-
tem Settings -> Regional Settings). If the operating
mode is PP (Point to Point), only the system number will
be registered. You must configure MSN numbers (Ba-
sic->MSN->Settings). Any MSN number previously
configured must be deleted.
Automatic MSN assignment facility provided by
a local carrier only works if you also subscribe to
Call forwarding on the public network.

Assignment of an MSN to attendants

MSNs registered for each slot (see "MSN and extension
assignment for external outgoing calls - code 086")
must be assigned to extensions, call groups or a mail-
box using an EVM Virtual Port (see "Mailbox assign-
ments - code 203") designated for answering calls dur-
ing a specified period of time.
You may not insert the same extension, group or EVM
virtual port more than once. A distinctive tone on the
handset indicates an invalid entry.
In the default configuration, there are no extensions as-
signed to any slots.
Required: Programming mode must be activated (*95
31994).
w
Enter the programming code.
Digital trunk settings
161