Siemens HiPath 1100 Programming Manual page 132

Report
Step by step
132
If ADSL Connection mode is not being used to
issue
tickets, we recommend that you deactivate the
"Cable Printing" checkbox in the HiPath1100 Man-
ager.
To provide accurate call details, you must update
the system's
( page 103).
The following information is recorded:
• Current date (Date)
• End of the call (Time)
• External line used (Ln)
Note: Example of the (Ln) field content for ticketing:
External line
801
802
If the extension is programmed with the Call de-
flection feature, the Ln field will show the num-
ber 45.
• Extension (Ext)
Some specific types of access will be displayed in this
field, indicated by the following numbers:
:
Access
Sensor - Outgoing call
Data Link - Outgoing or incoming data call
for system administration
DISA - Incoming call
Fax/DID - Incoming call
• COS changeover (WCOS)
• Ring duration (Ring)
• Call duration (Duration)
• Dialed number (Number)
To maintain confidentiality, the last four digits of the
number can be replaced with a "?."
time and date
(Ln) Field
00
01
information
(Ext)
Field
9101
9201
9301
9401