Siemens HiPath 1100 Programming Manual page 44

External line settings
Step by step
ddi
44
HiPath 1100 systems are capable of receiving Caller ID
information through FSK and DTMF protocols over ana-
log lines. This service must be activated by the local car-
rier.
The default setting depends on the country.
Required: Programming mode must be activated (*95
31994).
w
Enter the programming code.
w
Enter a number for an analog trunk (e.g., 801).
d . g
Select the type of protocol:
d
= deactivated
e
= DTMF1
f
= DTMF2 (off hook)
g
= FSK
w
p
Enter the next external line number.
or
w
r
Press this key.
Initial status for programming mode.
Country
Brazil, China, India, Peru, IM-Spain
and IM-English
Russia
Other countries
When a Country setting is specified ("Country/
group of countries" on page 20), the appropriate
protocol is automatically selected.
Protocol Code
DTMF1 1
DTMF2 2
(off hook)
FSK 3