Warmline - Siemens HiPath 1100 Programming Manual

Step by step
ejf
or
w
r
Press this key.
Initial status for programming mode.

Warmline

Specify the length of time the extension should wait to
call the first number configured as a Hotline. Assuming
the timeout is 9 seconds, the call will be made 9 sec-
onds after the handset is lifted. However, if during the 9
second time interval a key is pressed on the phone key-
pad, the call to the Hotline will be canceled.
Each extension can have a different timeout for enabling
a Hotline. This timeout may vary from 0 to 9 seconds.
By default, the Hotline activation timeout is "0 seconds".
Required: Programming mode must be activated (*95
31994).
w
Enter the programming code.
w
p
Enter the extension number (except 11/101, for exam-
ple, 12/102) for which you want to change the timeout.
d . m
Enter the length of time (0 to 9 seconds) for the Hotline
timeout.
w
p
Enter the next extension number.
or
w
r
Press this key.
Initial status for programming mode.
Programming an extension
79