Without Msn Verification; Remote Administration Via Dtmf - Siemens HiPath 1100 Programming Manual

General settings
Step by step
dkd
q
eik
qmme
120

Without MSN verification

Remote Administration will be performed without veri-
fying the Service MSN transmitted.
Required: Programming mode must be activated (*95
31994).
w
Enter the programming code.
w
r
Activate/Disable:
or
q
= Activated
r
= Deactivated (default)
w
Initial status for programming mode.

Remote administration via dtmf

With this feature you can configure the HiPath 1100 re-
motely with an MF telephone.
Required: Programming mode must be activated (*95
31994).
w
Enter the programming code.
q r
Activate/deactivate remote configuration:
or
q
= Activate remote configuration (default)
r
= Disable remote configuration (default)
w
Initial status for programming mode.
t
Replace the handset.
Example: Remote configuration must be activated and
the programming extension must have a conversation
in progress on the external line over which program-
ming is to be performed.
w
With a conversation in progress enter the programming
extension code to transfer control of the HiPath 1100 to
the remote programmer.
w
p
The remote programmer must now enter the system
password using an MF telephone (default - 31994).
w
Wait for a confirmation tone to indicate that the pass-
word was accepted.