Important Settings; Language; Country/Group Of Countries - Siemens HiPath 1100 Programming Manual

Important settings

Step by step
ejh
eji
20
Important settings
Some settings may be modified right from the begin-
ning. In most cases, however, we recommend using
the default settings. If you need to change any settings,
see the following chapters.

Language

Defines the language for displaying messages on the
system telephone display. This field is not automatically
updated since it is based on the country option select-
ed. When the Language field is changed the Country is
not automatically changed. It is possible, therefore, to
select a country with a different default language. Ex-
ample: Country: Brazil, Language: English.
Required: Programming mode must be activated (*95
31994).
w
Enter the programming code.
w
p
Select the language for displaying messages.
d
= Custom
e
= Portuguese
f
= Spanish
g
= English (default)
h
= French
i
= Italian
j
= Turkish
w
Initial status for programming mode.

Country/group of countries

To configure the settings correctly select the country
where the system will be used.
Required: Programming mode must be activated (*95
31994).
w
Enter the programming code.
w
p
Enter the code for the country or group of countries as
shown on the table below (e.g., "03" for Portugal).