S2M Maintenance; Call Report - Siemens HiPath 1100 Programming Manual

Step by step

S2M Maintenance

You can use the administration program to:
• download software
• remove traces
• select the software's type of connection to the mod-
ule (local or via modem)
• select a COM port
For further details on how to configure a TME1 module
refer to the program's "Help" system.
The availability of administrative softwares Hi-
Path 1100 Manager, HiPath 1100 ADSL Manager,
S2M software and E1 Trunk Manager for our cli-
ents is subject to undergoing a technical course
for prospective users.
If the TME1 module is connected to the S2M
Manager Tool but is configured with the CAS
software, the technician will be warned via a
popup message that the software installed is not
compatible with the S2M Manager. The mes-
sage will suggest that the user download the ap-
propriate software (Menu Download->Software).
The user may then choose whether or not to
download the S2 software. The same thing hap-
pens if the module is connected to the E1 Trunk
Manager Tool but is configured with the S2 soft-
ware.

Call Report

CallReport is a billing system that allows you to record
information about calls originated or received by your
PABX system.
CallReport runs on a regular PC under a Windows 95 /
98 /NT 4.0 / 2000 / XP environment. It receives data
sent by the PABX that are then processed and stored in
a PC hard disk and identified by extension, time, call du-
ration, trunk, outgoing route and call cost. Based on this
data the software can generate reports including total
costs per extension, sector, group, in addition to traffic
reports for both outgoing and incoming calls.
All the information is specified in the CallReport data-
base and can be manipulated by the user logged in as
Administrator.
Call Report
191