Callback/Urgent Call Activation For Timeout; Caller Id By Name/Number - Siemens HiPath 1100 Programming Manual

Programming an extension
Step by step
dgk
q
dgm
e . g
68
Callback/urgent call activation for tim-
eout
When an extension or external number is busy, this con-
figuration allows you to set a timeout for enabling the
Callback or Urgent Call features after approximately 7
seconds when the extension or external number called
(via digital ISDN line) is busy..
Required: Programming mode must be activated (*95
31994).
w
Enter the programming code.
w
r
Activate/Disable the features:
or
q
= To activate Callback and deactivate Urgent Call
r
= To deactivate Callback and activate Urgent Call
(default)
w
Initial status for programming mode.

Caller ID by name/number

This feature enables Caller ID information to be dis-
played on an extension's telephone display.
Required: Programming mode must be activated (*95
31994).
w
Enter the programming code.
w
Select the information to be shown on the display:
e
= Name and number (default)
f
= Name only
When the ""Call deflection" on page 154" feature
(Code 228) is activated, there should not be ex-
ternal call forwarding to an extension that is a
member of a group. (does not work on analog
lines)
In this case, the system does not receive any in-
formation about the forwarded call having been
answered or not. Since the system does not
have this information it continues to signal all
other group members.