Cos Changeover; Attendant Console - Siemens HiPath 1100 Programming Manual

Important settings
Step by step
ekl
q
eid
eid
36

COS changeover

You can allow or deny a temporary COS changeover
from an extension to a different extension.
Required: Programming mode must be activated (*95
31994).
w
Enter the programming code.
w
p
Enter the extension number (e.g., 11/101).
w
r
To allow/deny COS changeover:
or
q
= Allowed
r
= Denied (default)
w
p
Enter the next extension number
or
w
r
Press this key.
Initial status for programming mode.

Attendant console

The attendant console centralizes the flow of calls at up
to two answering stations equipped with system tele-
phones with a display. In the default configuration no at-
tendant console is configured.
Required: Programming mode must be activated (*95
31994).
w
Enter the programming code.
w
p
Enter an extension number for the attendant console
(e.g., 12/102).
w
p
Enter the next extension number, if you wish.
or
w
r
Press this key.
Initial status for programming mode.
Deleting an attendant console
Required: Programming mode must be activated (*95
31994).
w
Enter the programming code.
w
q
Delete all attendant consoles.