Step by step
ffi
q
w
r
Press this key.
Initial status for programming mode.
Carrier selection mode: LCR or ACS
This allows the user to change carrier selection and use
the best possible option to originate external calls.
Required: Programming mode must be activated (*95
31994).
w
Enter the programming code.
w
r
or
ACS/LCR:
q
= ACS
r
= LCR (default)
w
Initial status for programming mode.
Warning tone for calls without LCR
When the system is configured to use LCR, the HiPath
1100 can alert the user when an external call is being
placed to a destination using a non-default carrier with
rates that may be higher for that time of day. This may
be due to the unavailability of an external line for LCR
(Least Cost Routing).
When using a standard telephone, a warning tone indi-
cates to the user that a different carrier is completing
the call at this time. When using a system telephone,
the carrier's name will show on the display.
Required: Programming mode must be activated (*95
31994).
The attendant console does not receive "Direct
message to the speakerphone" and it must not
belong to any associated group.
Only the first attendant Console will be called for
digit 9. The second should be for the extension
number.
When the system is configured with a carrier di-
aling selection mode and is reconfigured to work
with a different selection mode (for example,
ACS >>LCR), all the previous settings are lost.
Important settings
37