Message Mode; Message For Msn; System Number - Siemens HiPath 1100 Programming Manual

EVM module
Step by step
fdm
fed
dde ehd
...
174

Message mode

This setting specifies whether a message will be played
only once or repeatedly.
Required: Programming mode must be activated (*95
31994).
w
Enter the programming code.
e f
or Select a Message:
e
= Greeting 1
f
= Greeting 2
e f
or
Select the mode:
e
= Continuous (default)
f
= Single
w
r
Press this key.
Initial status for programming mode.

Message for MSN

This setting specifies whether a message will be played
for a specific MSN.
Required: Programming mode must be activated (*95
31994).
w
Enter the programming code.
w
Enter MSN slot (001 ... 140).
e f
or Select a Message:
e
= Greeting 1
f
= Greeting 2
w
r
Press this key.
Initial status for programming mode.

System number

This setting specifies the HiPath 1100 number to be
used when the system operates in a Point-to-Point (PP)
environment.
Required: Programming mode must be activated (*95
31994).