I Quick Set Mode Items - Icom IC-703 Instruction Manual

12
SET MODE

I Quick set mode items

Mode Set mode item
SSB
CW
This item adjusts the RF output power. The RF out-
put power can be adjusted from L, 1 to 9 and H for in-
dication, however, it can be adjusted continuously.
This item adjusts microphone gain from 1 to 10 for in-
dication, however, it can be adjusted continuously.
This item adjusts the CW key speed. The key speed
can be selected from 6 to 60 wpm.
This item selects RTTY or åRTTY (RTTY reverse)
mode.
This item selects the carrier point. USB mode or LSB
mode are selectable.
This item adjusts the carrier frequency (BFO fre-
quency), allowing you to change the audio character-
istics. Selectable values are –200 to +200 Hz in 10 Hz
steps.
This item selects CW or CWå (CW reverse) mode.
75
Default setting
H
5 level
0 [Hz]
H
20 [WPM]
n (normal)
(all modes)
(SSB/AM/FM modes)
(CW mode)
(RTTY mode)
(SSB-D mode)
(SSB mode)
(CW mode)
Mode Set mode item
RTTY
SSB-D
FM/AM
The default is H (maximum power).
Note that while adjusting the output
power, the power meter is displayed
automatically.
The default is 5.
Note that while adjusting mic gain, the
ALC meter is displayed automatically.
CW
The default is 20 wpm.
RTTY
The default is normal.
LSB
The default is LSB mode.
USB
The default is 0 Hz.
CW
The default is normal.
Default setting
H
n (normal)
H
L (LSB side)
H
5 level