Logical Commands (Fc) - IBM TotalStorage DS300 Best Practices Manual

Hide thumbs Also See for TotalStorage DS300:

Table of Contents

Activate the logical drive's ACL.

Activating the ACL restricts access to the logical drive to only those initiators

defined by the logical manage logical allow command.

scope scope_list

Redefine a new list of scopes to which the logical drive should belong. A logical

drive is always in the DEFAULT scope.

sessions info | list | reset session_ids

Manage active iSCSI sessions. The info parameter shows detail information for

iSCSI sessions; list displays a list of sessions; reset shuts down the specified

sessions, or all sessions if none are specified.

unrestricted

Disable the logical drive's ACL. Disabling the ACL allows unrestricted access to

this logical drive.

A.22 Logical commands (FC)

These commands control the FC logical drives. They are available after the

global logical command, or as global commands by preceding them by logical.

clear logical_drives

Clear the ACL on a list of logical drives.

logical_drive

logical_drive available_array available | size

[logical_list]

logical (see logical manage logical commands)

Appendix A. Command line interface reference

administrator

Totalstorage ds400