Administer Management Station User Accounts; Administer Management Station User Accounts With Serveraid; Manager Console - IBM TotalStorage DS300 Best Practices Manual

4.9 Administer Management Station user accounts

The Management Station has its own user management. Operators and
administrators can be defined. Operator has the permission to look at items.
Administrator can modify items. The operator level can only by created by a
command line utility USER_TOOL. This utility is located in the installation
directory of the IBM ServeRAID Manager.
Note: Management Station and USER_TOOL are only available in the
Microsoft Windows operating system version of the IBM ServeRAID Manager.
Section 4.9.1, "Administer Management Station user accounts with ServeRAID
Manager console" on page 162 explains the user management with the
ServeRAID Manager console.
4.9.2, "Administer Management Station user accounts with USER_TOOL" on
page 163 explains the account management from the command line.

4.9.1 Administer Management Station user accounts with ServeRAID

Manager console

1. To manage the user accounts of the Management Station right-click the
Management Station Management station actions → Configure.
Figure 4-137 Configure Management Station
2. The configuration dialog of the Management Station opens. The listed user is
the user created during installation of the ServeRAID Manager.
162
IBM TotalStorage DS300 and DS400 Best Practices Guide