IBM TotalStorage DS300 Best Practices Manual page 429

15.The MPIO path details are shown. Verify the source portal and the target
portal of the connection. Click OK to close the MPIO Path Details dialog.
Highlight the standby path, click Details again to verify now the settings for
the standby path.
Figure 7-295 Microsoft iSCSI software initiator 2.0 configuration step 15
16.Close all open dialogs to return to the main iSCSI Initiator Properties dialog.
Execute steps 4-16 again for other logical drives you want to connect to.
Figure 7-296 Microsoft iSCSI software initiator 2.0 configuration step 16
Chapter 7. TotalStorage DS300 installation
411