IBM TotalStorage DS300 Best Practices Manual page 218

• The file will be downloaded from the controller and saved in the
Figure 4-196 Hyperterminal — Receive file
• The command line interface informs you of the successful dump
Figure 4-197 Hyperterminal — Dump successful sent
• Repeat this actions on the Controller B in case you have a dual
d. CLI command output
Use Windows HyperTerminal or PUTTY or any other Telnet client which is
capable of capturing the screen output into a file.
i. Use Hyperterminal to connect via TCOP/IP (Winsock) to Controller A.
200
IBM TotalStorage DS300 and DS400 Best Practices Guide
specified location. This window will close after the download is done.
transmission.
controller TotalStorage DS300 or DS400.