IBM TotalStorage DS300 Best Practices Manual page 162

26.In Figure 4-110 on page 144, the Add button permits definition of initiators
manually. Initiators can be deleted with Delete. Click Next.
Note: When an initiator is added manually, the world wide name might be
copied into the initiator field. The field has a length of 23 characters to allow
a copy of WWN with colons or other separator characters. However, they
need to be removed before the initiator is created.
initiator create
WOLGA-SLOT3-(3)
210000e08b0ff748
Figure 4-110 List of defined initiators
27.In Figure 4-111 on page 145, assign the logical drives to the initiator alias
WOLGA-SLOT3-(0). The logical drives will be added under the initiator alias
and removed from the enclosure window. Select the initiator alias
WOLGA-SLOT4-(1). All logical drives are shown in the enclosure. Add the
same logical drives to the selected initiator alias. A warning appears when a
logical drive is assigned to more than one initiator. This should be required for
systems with multiple HBAs installed and connected to a TotalStorage DS400
or for clustered systems. Click Next.
144
IBM TotalStorage DS300 and DS400 Best Practices Guide