IBM TotalStorage DS300 Best Practices Manual page 77

Figure 3-20 IBM iSCSI Server Adapter
Works only at 1Gbps, full duplex. 10/100 speeds are not supported.
Single-port PCI-X 64-bit/133MHz copper adapter over CAT 5E or CAT 6 cable
Supports both 3.3v and 5v slots
Half-high card with a standard size bracket
Based on QLogic QLA4010C HBA with ISP4010 iSCSI/TOE chipset
Full hardware TCP/IP Offload Engine (TOE) and iSCSI Initiator
Supports iSCSI boot
For all IBM Eserver xSeries IA32 systems.
All driver software is provided by QLogic.
Supports Windows 2000, Windows 2003, Linux Red Hat, SUSE Linux
The Windows 2000 and 2003 drivers and related software are included with the
card. The drivers are digitally signed.
For the drivers and related software for Linux RHEL and SUSE SLES, go to the
following Web site.
http://www.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-57073
QLogic iSCSI TOE Expansion Card for IBM eServer
BladeCenter 26K6487
The QLogic iSCSI Expansion Card for IBM eServer
hardware initiator that provides iSCSI communication from the blade server
(HS20, HS40, and LS20) to an iSCSI storage device (for example, the DS300.
This card offloads the iSCSI processing load from the CPU.
Full iSCSI initiator function from HS20, HS40, and LS20 to iSCSI storage
devices
Enables blade servers to run diskless in a non-Fibre Channel SAN
environment
BladeCenter option is a
™
Chapter 3. Components overview
59