Display Groups - IBM TotalStorage DS300 Best Practices Manual

4.7.6 Display groups

Display groups might be used to group IBM ServeRAID Manager Management
Stations together. This provides a management overview about the health of the
Management Stations and agents in this group. After an agent has got a
problem, the display group gets an attention mark to inform you that interactions
are required. Use the property window of the display group to get a overview
about all agents in the display group.
Note: Display groups are not available when a boot from a IBM ServeRAID
Manager Support CD is performed or when the IBM ServeRAID Manager is
used as IBM Director plug-in. IBM Director 5.10 may be able to support
management of DS300 and DS400 controller.
Create a new display group
To create a new display group perform the following steps.
1. Select a Management Station within the enterprise view with a right-click. In
the context menu click Change display group → New group.
Figure 4-44 Menu change display group
2. Enter in the opened group name window a name for the display group. Click
the OK button to create the display group.
106
IBM TotalStorage DS300 and DS400 Best Practices Guide