Replicate Ibm Serveraid Manager Settings To Another System - IBM TotalStorage DS300 Best Practices Manual

Figure 4-55 Menu display group properties
2. The properties window opens an a overview is shown. Click the close button
in the top right corner to close the properties window.
Figure 4-56 Display group properties

4.7.7 Replicate IBM ServeRAID Manager settings to another system

You can configure ServeRAID Manager settings on other servers exactly as they
are configured on one server. To replicate the ServeRAID Manager tree,
notification list, and security list, do the following:
1. Install the ServeRAID Manager on one server.
2. Start the ServeRAID Manager. Using the 'Add remote system' action, define
the servers for your tree.
3. Open the Notification Manager. Using the 'Add system' action, define the
notification list.
4. Open the Security Manager. Using the 'Add user' action, define the security
list.
112
IBM TotalStorage DS300 and DS400 Best Practices Guide