Figure 4-182 Question
5. Click Yes to reboot the system.
Figure 4-183 Reboot Confirmation
Note: Older versions of the ServeRAID Manager require a reboot. Newer
versions do not. Reboot the system when a reboot is requested.
4.14 IBM ServeRAID Manager removal on Linux
To remove ServeRAID Manager on a Linux server it is only necessary to execute
the rpm -e RaidMan command as shown in Figure 4-184.
danube:~ # rpm -e RaidMan
stopping IBM ServeRAID Manager agent ...
raid_agent
Uninstall completed successfully.
danube:~ #
Figure 4-184 ServeRAID Manager removal using the rpm command
4.15 Basic information gathering in case of trouble
To get help from the IBM technical support center, certain information about the
current status of your IBM Total Storage DS300 or DS400 is required. This
0:off 1:off 2:off 3:off 4:off 5:off 6:off
Chapter 4. TotalStorage DS300 and DS400 management
191