Driver And Service Pack Installation And Finishing The Setup; Install The Sansurfer Utility - IBM TotalStorage DS300 Best Practices Manual

7.1.7 Driver and service pack installation and finishing the setup

Install the Broadcom network driver for the adapter. Broadcom NetXtreme
Gigabit Ethernet #2 is connected to the port number 1. This port is also shared
by the baseboard management controller (BMC). This port might be connected
into a management network. Broadcom NetXtreme Gigabit Ethernet is routed to
port number 2. This is the port close to the power supplies.
There are operating system install instructions for all IBM ^xSeries
servers on the support pages. See Appendix C, "How to get updates of code and
documentation" on page 623.
1. Install service pack1 for Microsoft Windows Server 2003. Reboot the server.
http://www.ibm.com/pc/support/site.wss/document.do?sitestyle=ibm&lndocid
=MIGR-58619
2. Install remaining drivers not available during operating system installation:
a. Install the Intel chipset drivers.
b. Install ActivePCI.
c. All unknown devices are now removed.
d. Install IPMI driver. This driver is used for the BMC.
3. Reboot the server.

7.1.8 Install the SANsurfer utility

Install the SANsurfer utility to manage the iSCSI host bus adapter. The
SANsurfer utility is a client server application. On hosts with the installed host
bus adapters, at least the agent must be installed. The GUI can be installed on
the same host or can be installed on a management station. It is also possible to
install the GUI on the host and a management station. The latest release of the
SANsurfer utility is able to manage fibre channel host bus adapter, iSCSI host
bus adapter and the QLogic SAN switch for the IBM BladeCenter. The installation
allows to select the components separately. Finest granularity can be achieved
by the custom setup. The default setup installs everything.
1. Download the latest version from the following URL:
http://www.ibm.com/support/docview.wss?rs=1109&uid=psg1MIGR-58619
2. Run the installer file.
3. Click Next.
Chapter 7. TotalStorage DS300 installation
253