IBM TotalStorage DS300 Best Practices Manual page 101

DS300-1[A]# interface manage eth2[A] netmask 255.255.255.192
Please wait.
Interface values are now:
IP address: 192.168.1.61
Broadcast address: 192.168.1.255
Netmask: 255.255.255.192
DS300-1[A]#
Figure 4-8 Set iSCSI interface subnet mask
5. Change the broadcast address of the interface ETH2[A] by entering interface
manage eth2[A] broadcast 192.168.1.63 and press Enter.
DS300-1[A]# interface manage eth2[A] broadcast 192.168.1.63
Please wait.
Interface values are now:
IP address: 192.168.1.61
Broadcast address: 192.168.1.63
Netmask: 255.255.255.192
DS300-1[A]#
Figure 4-9 Set iSCSI interface broadcast address
6. Set the IP address, subnet mask and broadcast address for the first iSCSI
interface of controller B ETH2[B].
Chapter 4. TotalStorage DS300 and DS400 management
83