Create Qlogic Iscsi Expansion Card For Ibm Eserver Bladecenter; Driver Disk - IBM TotalStorage DS300 Best Practices Manual

Figure 7-33 Fast!Util options — Exit Fast!UTIL
34.Do not reboot the system at this time.
7.1.5 Create QLogic iSCSI Expansion Card for IBM eServer
BladeCenter driver disk
The driver disk is required because the driver is not included on the Microsoft
Windows Server 2003 Enterprise Edition CD.
1. Download the driver for the QLogic iSCSI Expansion Card for IBM ^
BladeCenter from IBM's support Web site.
http://www.ibm.com/pc/support/site.wss/document.do?sitestyle=ibm&lndocid=MI
GR-58619
There are different driver packages available. Use the SCSI port driver for
Microsoft Windows 2000. With Windows Server 2003, use the storport driver.
The packages also available with NDIS drivers. These drivers can be used to
make the iSCSI host bus adapter appear as a network adapter available for
the operating system. With these NDIS drivers, no TOE functions are used.
2. When using an SCSI port driver package without NDIS driver, unzip the driver
archive and store all files in the root of a 3.5" diskette. When using an archive
containing the SCSI port and NDIS driver, copy all files in the
StorMiniport\2.1.1.5 directory into the root of a floppy diskette.
Chapter 7. TotalStorage DS300 installation
247