Isns Commands (Iscsi Only); License Commands; Logical Commands (Iscsi) - IBM TotalStorage DS300 Best Practices Manual

A.19 iSNS commands (iSCSI only)
These commands manage iSNS configuration.
Command
info
server
info
Output information about the iSNS server.
server hostname | IP_address | clear
Set or clear the iSNS server.
A.20 License commands
These commands manage setting and displaying the license key.
Command
info
set
info
Output the license key, detailing enabled and disabled features.
set
Set a new license key.
A.21 Logical commands (iSCSI)
These commands control the iSCSI logical drives. They are available after the
global logical command. They may also be used as global commands by
preceding them by logical.
Parameters Levels
all
clear | isns_server administrator
Parameters
[xxxx- xxxx- xxxx- xxxx- xxxx- xxxx]
Appendix A. Command line interface reference
Levels
all
administrator
601