IBM TotalStorage DS300 Best Practices Manual page 410

environment, it is recommend to read the Microsoft iSCSI Software Initiator
Users Guide that can be downloaded as uguide.doc with the software initiator.
Open the iSCSI Initiator properties dialog by starting iSCSI Initiator in the
control panel. Execute the following steps to do the configuration:
1. Click the Initiator Settings tab to view the initiator node name. The logical
drives on the DS300 that are used must allow access to the logical drives
from this initiator.
Figure 7-267 Microsoft iSCSI software initiator 1.06 configuration step 1
2. Device discovery can be done whether by entering target portals in the
Target Portals tab or by entering iSNS server IPs in the iSNS Servers tab.
We show how to configure device discovery by providing IPs of target portals.
Click the Target Portals tab.
392
IBM TotalStorage DS300 and DS400 Best Practices Guide