IBM TotalStorage DS300 Best Practices Manual page 340

Usage
ETH0 - Broadcast Address
Management LAN Gateway
DS300 - ETH2 Connected to
DS300 Controller A - ETH2 - IP
DS300 Controller B - ETH2 - IP
ETH2 - Subnet Mask
ETH2 - Broadcast Address
iSCSI LAN 1 Gateway
DS300 - ETH3 Connected to
DS300 Controller A - ETH3 - IP
DS300 Controller B - ETH3 - IP
ETH3 - Subnet Mask
ETH3 - Broadcast Address
iSCSI LAN 2 Gateway
Table 7-6 lists the network settings used on cluster node SEINE.
Table 7-6 Cluster node 1 network addresses
Usage
Host name
HBA0 - Port 0 connected to
HBA0 - Port 0 IP Address
HBA0 - Port 0 Subnet Mask
HBA0 - Port 0 Gateway
HBA1 - Port 0 connected to
HBA1 - Port 0 IP Address
HBA1 - Port 0 Subnet Mask
HBA1 - Port 0 Gateway
322
IBM TotalStorage DS300 and DS400 Best Practices Guide
Address
192.168.1.255
192.168.1.254
iSCSI LAN 1
192.168.1.13
192.168.1.14
255.255.255.192
192.168.1.63
192.168.1.62
iSCSI LAN 2
192.168.1.77
192.168.1.78
255.255.255.192
192.168.1.127
192.168.1.126
Address
SEINE
iSCSI LAN 1
192.168.1.9
255.255.255.192
192.168.1.62
iSCSI LAN 2
192.168.1.73
255.255.255.192
192.168.1.126