VLAN Precedence Settings
This window is used to configure VLAN precedence settings.
To view this window, click L2 Features > VLAN > Subnet VLAN > VLAN Precedence Settings, as shown below:
Parameter
Description
Unit
Select the switch in the switch stack to be modified.
From/To
These two fields allow the range of ports that will be included in the VLAN precedence.
Use the pull-down menu to select the VLAN precedence as MAC-based VLAN or Subnet VLAN.
VLAN
Precedence
Click Apply to implement the changes.
®
xStack
DGS-3600 Series Layer 3 Managed Gigabit Ethernet Switch
Figure 3- 21. VLAN Precedence Settings window
108