Inputs And Outputs - Teletek electronics CA60Plus Installation Manual

TeleTek
BATTERY
12 V / 7 Ah
• • • • • AC - 17 V/24 VA AC transformer power supply
• • • • • Earth - Earthening wire
• • • • • +AUX and - AUX - 13 V DC - 1A power supply for detectors
• • • • • +PGM - 13 V DC - 1A power supply for auxilliary units
• • • • • PGM1, PGM2 and PGM3 - programmable outputs
• • • • • SIREN - siren programmable output
• • • • • Z2, Z3, Z4, Z5 and Z6 - zone inputs; (zone Z1 is in the keypad)
• • • • • COM - common shield
• • • • • A and B - to telephone company connectors
• • • • • A1 and B1 - to phone
• • • • • RED and BLACK - keypad power supply
• • • • • GREEN and YELLOW - panel - keypad interface
• • • • • F1 - battery fuse 2A
• • • • • F2 - auxilliary supply fuse 1A
• • • • • F3 - fuse 1A for powering the detectors, the programmable outputs ant the keypad
• • • • • 12 V, 7 Ah battery cables
CA60Plus

3. Inputs and Outputs

Reset jumper
F3
F1 (BATT) - 2 A
F2 ( AUX) - 1 A
F3 (PGM) - 1 A
F1 F2
Fig. 3 Inputs and Outputs
5
Installation Manual
A
B
A1
B1
LED