Teletek electronics CA60Plus Installation Manual page 27

TeleTek
ADDRESS 86 ARM REPORT CODE
Arm Report code (X). Hexadecimal indication. The code number is added
ARM CODE
automatically before transmitting the message to the monitoring station.
DEFAULT : 7
ADDRESS 87 DISARM REPORT CODE
Disarming Report code (X). Hexadecimal indication. The code number is added
DISARM CODE
automatically before transmitting the message to the monitoring station.
DEFAULT : 8
ADDRESS 88 TROUBLE REPORT CODE
Trouble Report code (X). Hexadecimal indication. The number of the respective
TROUBLE CODE
trouble is added automatically before transmitting the message to the monitoring
station as follows:
DEFAULT : 9
ADDRESS 89 RESTORE REPORT CODE
Zone Restore Report code (X). Hexadecimal indication. The number of the
RESTORE CODE
respective trouble is added automatically before transmitting the message to the
monitoring station.
DEFAULT : B
CA60Plus
x1. Blown Fuse F3 - PGM
x2. Blown Fuse F2 - AUX
x3. LOW BATT
x4. AC LOSS
x5. Non trasmitted
x6. Communication Fault
x7. RESTORE "LOW BATT"
x8. RESTORE "AC LOSS"
27
Installation Manual