Teletek electronics CA60Plus Installation Manual page 8

TeleTek
On Fig. 8 is described the SR2000 siren (produced by TeleTek
used - SIREN and PGM3. When an alarm event occurs the SIREN output switches to a low level and
activates the SR2000 siren. When an alarm event responding to the PGM3 parameters occurs the PGM3
output switches to an active level and the SR2000 siren (depending on its configuration) activates its
signal lamp or produces a "FIRE" audible signal.
Fig. 8 Siren Management by SIREN and PGM3 Outputs
CA60Plus
COM
Z2
SIREN
PGM3
PGM2
PGM1
+PGM
-AUX
+AUX
AC
CA60Plus
8
Installation Manual
) wiring. Two managing signals are
®
BlkSIREN
BlkFIRE
-12 V
+12 V
SR2000