Teletek electronics CA60Plus Installation Manual page 22

TeleTek
ADDRESS 57 CALL BACK OPTION
YES
NO
DEFAULT : NO
ADDRESS 58 NUMBER OF RINGS
NUMBER OF
RINGS
DEFAULT : 7
ADDRESS 59 ANSWERING MACHINE OPTION
YES
NO
DEFAULT : NO
CA60Plus
In this address the Call Back option for remote programming is set. Each
pressing of a digit key alters the Call Back option enable / disable.
If Call Back option enabled, after an incoming call and request for remote
programming, control panel hangs up and dials the number of remote PC. After
connecting to remote PC the remote programming starts.
The display indication is described in the table.
Call Back option enabled. The LEDs from 1 to 6 light.
Call Back option disabled. The LEDs from 1 to 6 do not light.
In this address the Number of Rings before control panel answers for remote
programming is set.
The symbols from 0 to 9 could be used.
If 0 entered the remote programming is disabled.
It is recommended to enter value up to 7.
In this address the Answering Machine option for remote programming is set.
Each pressing of a digit key alters Answering Machine option enable / disable.
If there is an answering machine (FAX for example) on the same telephone line
it is necessary to ensure connection to it. Therefore the Answering Machine
option has to be enabled. On the first incoming call series the control panel will
not answer. On each next incoming call for 4 minutes time period the control
panel will answer.
The display indication is described in the table.
Answering Machine option enabled. The LEDs from 1 to 6 light.
Answering Machine option disabled. The LEDs from 1 to 6 do not light.
22
Installation Manual