Fujitsu primergy TX150 User Manual page 159

4
Click [or Insert a ServerStart Floppy Disk to Start ServerStart].
The [Welcome to ServerStart] window appears.
5
Eject the ServerStart floppy disk.
■ Creating a Configuration Tool Floppy Disk
Start up ServerStart and confirm that the [Welcome to ServerStart] window is displayed.
1
Start up ServerStart and click [FloppyBuilder].
The [ServerStart FloppyBuilder] window appears.
2
Click [Hardware Configuration Tools].
3
Click the tool you want to create.
Insert the prepared floppy disk by following the message.
PRIMERGY TX150 S4 User's Guide
5
159