Workflow - Fujitsu primergy TX150 User Manual

Chapter 1 Overview

1.5 Workflow

To start the server operation, perform the following procedures.
Installing the server
Refer to "Safety Precautions" and "Start Guide" to install the server to a suitable place.
Preparing the server
- Install hardware options
- Set hardware
Refer to "2.1 Preparation on the server", "Chapter 7 Installing Internal Options" and
"Chapter 8 Configuring Hardware and Utilities".
Selecting the installation method
Refer to "2.2 Selecting the Installation Method" to decide what installation method to use.
ServerStart, a software program that enables everything from OS installation/setup to the installation of high
reliability tools to be performed in one operation, comes with this server. It is recommended that
ServerStart is used to perform installation.
Checking precautions on installation
Before installing the OS check the precautions on installation by referring to "2.3 Precautions on Installation".
Using ServerStart
Refer to "Chapter 3 OS Installation Using
ServerStart" to perform OS installation.
Installing internal options
Refer to "Chapter 7 Installing Internal Options" to install the internal options.
Procedures before operation
Before operating the server, refer to "Chapter 5 Operations after OS installation".
High reliability tools installation
When the OS is installed manually, it is necessary to install high reliability tools. Server V iew requires
settings before server operation. For installation method and details about each high reliability tool, refer
to "Chapter 6 High Reliability Tools".
42
OS installation
Manual installation
Refer to "Chapter 4 Manual OS
Installation" to perform OS installation.
Start operations