Console Redirection Submenu - Fujitsu primergy TX150 User Manual

Chapter 8 Configuring Hardware and Utilities

■ Console Redirection Submenu

This submenu configures detailed settings for console redirection.
Item
Console Redirection
Media Type
Port
Baud Rate
Protocol
Flow Control
Mode
236
table: Items on the Console Redirection Menu
Setting
• Disabled (Initial value)
• Enabled
• Serial (Initial value)
• LAN
• Serial1 (Initial value)
• Serial2
• 1200
• 2400
• 4800
• 9600 (Initial value)
• 19.2K
• 38.4K
• 57.6K
• 115.2K
• VT100
• VT100,8bit
• PC-ANSI,7bit
• PC-ANSI
• VT100+ (Initial value)
• None
• XON/XOFF
• CTS/RTS (Initial value)
• Standard
• Enhanced (Initial value)
Description
Sets whether to enable or disable console redirection.
When set to [Enabled] the following parameters
appear. Set each of them. If set to [Disabled], the
items are not displayed.
Sets the connection type for console redirection.
Sets the serial port to be used for console redirection.
Sets the speed of the console redirection connection
(in bps).
Sets the console type for console redirection.
Sets flow control for console redirection.
Sets the range of use for console redirection.