Fujitsu primergy TX150 User Manual page 150

Chapter 5 Operations after OS Installation
■ Paging File Setting
Set up the paging file according to the following procedures:
1
Log on to the server with administrator privileges.
2
Check free space of the drive where the system is installed.
Check the required amount of free space according to "
( pg.147). If the drive has no free space, refer to "
( pg.268).
3
Click [Start] → [Settings] → [Control Panel].
4
Double-click the [System] icon.
The [System Properties] window appears.
5
Click the [Advanced] tab and click [Performance Options].
The [Performance Options] window appears.
150
■
Checking Hard Disk Free Space"
■
Cannot Collect the Memory Dump"