Fujitsu primergy TX150 User Manual page 135

For the following LAN card, the network adapter is recognized when the card is mounted during OS
installation.
• PG-1852
1
Click [Start] → [Administrative Tools] → [Computer Management].
2
Click [Device Manager].
On the Device Manager list, check if a recognized network adapter is present.
(Window example)
When a recognized network adapter is present, [Network adapters] appears.
●
When a recognized network adapter is present
■
Perform " Updating LAN Drivers" ( pg.136) on the LAN device name under [Network adapters],
■
then " Installing the LAN Driver" ( pg.137) on [Ethernet controller] under [Other devices].
●
When a recognized network adapter is not present
■
Perform " Installing the LAN Driver" ( pg.137) on [Ethernet controller] under [Other devices].
PRIMERGY TX150 S4 User's Guide
Recognized
network adapter
Unrecognized
network adapter
4
135